press information

08-Jun-2017 | 737-EN

Making the cooling effect of textiles measurable

Development of a thermophysiological model to evaluate cooling textiles using the heat loss tester WATson

BÖNNIGHEIM (blb) In recent years there has been a steady increase in the demands made on the properties of function, sports and workwear textiles. In order to achieve a cooling effect, special textile constructions are developed, which increase the sweat evaporation and thus the cooling of the body.
But how can the cooling effect of intelligent textiles be measured?

There are already various methods to characterize such properties. Until now they are not linked to thermophysiological methods and models, which are capable to objectively determinate comfort levels. The desire here is for a practical method that not only takes account of physical measurement data, but also the resulting cooling effect observed in controlled wearer trials in a climate chamber.

This process is however very time-consuming, while also requiring a large group of test subjects, so ultimately leading to higher product prices. In short: A level of effort that is neither affordable, nor feasible for small and medium-sized enterprises.

Making measurement data comparable

With the WATson heat loss tester Hohenstein Institut für Textilinnovation (HIT) has now developed a new physical measuring method for determining the cooling performance of textiles – heat release tester WATson. Until now there is no correlation of the data obtained using WATson with actual wearer trials and thermophysiological models.

The textiles industry however needs such an evaluation system for the goal-oriented development of cooling textiles – in other words a system capable of measuring the quality of a cooling process, e.g. temperature range, duration, impact on the heat / humidity balance of the wearer.

With these requirements in mind, HIT then embarked on a research project to develop a thermophysiological evaluation system for the textiles industry. The aim here is for the new evaluation system to compare the results of the WATson heat loss tester with data from experiments on subjects in a climate chamber under different ambient conditions.

Structure of research project

  • Characterisation of cooling textiles with the heat loss tester
  • Performance of monitored wearer trials in a climate chamber examining different cooling textiles and a variety of ambient conditions (temperature, humidity, wind etc.)
  • Examination of the cooling effect of textiles under consideration of different parts of the body
  • Examination of the cooling effect of textiles with different levels of physical exertion

Following analysis and correlation of the data from the various work stages, the intention is to provide industry with an efficient thermophysiological system for the evaluation of cooling textiles using WATson.

Benefit for the textiles industry

German manufacturers of cooling textiles benefit directly from the evaluation system developed on this project aimed at the objective determination and assessment of the cooling performance of textiles. This project is of major economic benefit to Germany's textile industry, as companies will only succeed in improving their competitive ability if their products actually offer the functionality required by customers.

Acknowledgement: IGF-project 18929 N under the auspices of the Research Association Forschungskuratorium Textil e.V., Reinhardtstraße 12-14 10117 Berlin, was sponsored via the AIF as part of the programme to support "Industrial Community Research and Development" (IGF), with funds from the Federal Ministry of Economics and Energy (BMWi) following an Order by the German Federal Parliament.

back to overview

press contact

Annika
Balbach
Phone
+49 7143 271-853